MLL-Vertical awning
Vertical awnings are often referred to as vertical awnings, are multifunctional and visually appealing. They serve as vertical privacy and sun protection. Mounting in front of the window prevents the sun's rays from penetrating and thus heating up the room behind. The MLL vertical awning can be easily mounted in front of a window opening, in the reveal, shaft mounting is also possible. Due to the many possible combinations with fabrics and colours, cable or rail guidance, the MLL vertical awning is suitable for optimising the room climate, both as a darkening system. Installation indoors is also possible.
Vertical awnings from MLL-Lichtschutz leave nothing to be desired in terms of design - you decide whether you want them to blend in harmoniously with the exterior of the building or whether you want them to set an accent. We are at your service from the design and technical development to the installation.
MLL system structure:
The MLL vertical awning is a facade awning which is ideally suited for use on large window areas and is used for shading windows, doors or conservatories. Vertical awnings have a maximum width of up to 4 m, but several hangings can be coupled. Here the maximum areas are between 18 and 20 m². As with the other types of awnings, acrylic fabrics, screens or blackout fabrics are used as covering and as drive, crank mechanism and radio/electric motors
Advantages at a glance
- Thermal insulation at high outside temperatures
- Glare protection, privacy protection
- Several systems can be coupled
- Can be combined with MLL external venetian blind systems
- New construction and retrofitting possible
- 230V motor with overload protection and adjustable end positions
- Comfortably controllable by remote control (radio motor)
- Alternatively with crank mechanism
- Cable or rail guided
- Control via wind, rain and sun sensor possible
- Fabric and colour variants or blackout wheel freely selectable
- Translucent shading to opaque darkening possible
- Flame retardant according to DIN 4102 B1/M1
- Resistant to moisture
Mounting situations
Type code
This type code explains the construction of the MLL vertical awnings so that you can choose the right type.
Execution variants:
| Execution Plant | Curtain | Aperture characteristics | Front panel / Box height | Guide rail | Motor drive | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | Abbreviation | AC | SD | VD | BR | BK | 001 | 110 | 140 | FS | SE | EL | FM | 24 | KB45 | KB90 | ||||
| Vertical awing | SM | x | x | x | x | x | x | x | x | x | x | x | x | |||||||
| Vertical awing | SM | x | x | x | x | x | x | x | x | x | x | x | x | |||||||
| Vertical awing | SM | x | x | x | x | x | x | x | x | x | x | x | x | |||||||
Limit dimensions (in mm):
• With cable guide all box sizes max. width 4000 mm, max. height 3000 mm
• With rail guide, shaft mounting and 110 mm box height max. width 4000 mm, max. height 4000 mm
• With rail guide, box height 140 mm max.width 4000 mm, max. height 8000 mm